Apex Pump Buddy 25mm / 32mm
£109.82 inc. VAT
£91.52 exc. VAT
Apex Valves Pump Buddy
- Description
- Additional information
- Reviews (0)
Description
Apex Pump Buddy 25mm / 30mm
Series PumpBuddy valve is an inlet control device which allows for variable minimum and maximum water level settings within a water tank when filling from a pump. Used to maintain minimum and maximum water levels within a tank, saving electricity and extending pump life. Also used for Rain Harvesting applications as a back-up water supply control valve, in the event of demand exceeding rainfall.
- Full on, full off
- Adjustable water levels saves electricity & increases pump life
- No float switches, no power required (Pump requires pressure switch)
- High volume water inlet control device
APPLICATION
• Pump fed reservoirs – it allows for a single level or variable
minimum and maximum levels within a reservoir/tank.
• Rainwater Harvesting – as a backup water supply control valve,
providing mains water in the event of demand exceeding rainfall.
HOW IT WORKS
The PumpBuddy® will be closed when both weights are submerged
(maximum water level). The valve will remain closed until the bottom
weight is exposed (minimum water level). The valve will then open
and remain open until the maximum level is reached.
FEATURES & BENEFITS
• Adjustable water levels saves electricity & increases pump life
• Full on, full off – diaphragm activated
• No float switches – no power required (pump requires pressure
or flow switch)
• Long tail available – removes need for tank fittings on thin walled
tanks
• Can be used as a top up rainwater harvesting valve
• Fully serviceable
SPECIFICATIONS
Working Pressure: 55 kPa – 1200 kPa (8 -175 psi)
Flow Rate: 425 L/min (95 gal/min) @ 1200 kPa (175 psi)
Temperature Range: 1°C – 60°C (34°F – 140°F)
AVAILABLE SIZES
• 25mm (1”) Standard
• 32mm (1¼ ”) Standard
SPARES & ACCESSORIES
• Service Kit (contains diaphragm, jet assembly, backing plates,
cotter pin, spring & silicone grease)
• New Zealand Pat. No. NZ535912B and NZ560561B
• Australian Pat. No. AU2005220285B2 and AU2007205772B2
Additional information
| Sizes | 25mm, 32mm |
|---|
Reviews
There are no reviews yet.