Progiene Animal Health Solutions.

• Versatile application choice – dip, spray or foam
• Works in 30 seconds for rapid cleaning and sanitising
• Leaves teats feeling smooth and silky and ready to be milked
• Efficacy tested to EN1656:2009

Sizes available:

25L, 200L, 1000L

Application Advice:

Pre Milking Use

Apply clusters.

Apply product to clean teats by dipping, spraying or foaming.

Allow product contact time of at least 30 seconds.

Wipe off using a disposable wipe.

• Chlorhexidine provides rapid acting teat cleaning and disinfection
• High levels of lactic acid to promote healthy skin regeneration leaving teats feeling soft and supple
• Contains peppermint oil to help soothe inflammation
• Efficacy tested to EN1656:2009

Sizes available:

25L, 200L, 1000L

Pre-milking use:

1. Apply product to clean teats by dipping, spraying or foaming.
2. Allow product contact time of at least 30 seconds.
3. Wipe off using a disposable wipe.
4. Apply clusters.

Post-milking use:

1. Immediately after cluster removal, apply product to teats by dipping or spraying.
2. Ensure that teats are fully covered and that product is liberally applied.
3. Refill the dip cup as necessary.
4. Dip cups should be emptied after use and washed before re-use.
5. Do not pour unused product back into container.

High levels of lactic acid to promote healthy skin regeneration, leaving teats smooth and soft and ready to be milked

Rapidly cleans and sanitises to help improve milk quality

Efficacy tested to EN1656:2009

Sizes available:

25L, 200L, 1000L

Postmilking Use:

1. Immediately after cluster removal, apply product to teats by dipping.
2. Ensure that teats are fully covered and that product is liberally applied, refill dip cup as necessary.
3. Dip cups should be emptied after use and washed before re-use. do not pour unused product back into the container.

This product cannot be used through a teat sprayer.

Powerful cleaning action

High levels of sequestrants to aid fat and protein removal

For use with hot water.

Sizes available:

25L, 200L, 1000L

Application Advice:

Final Rinse

1. After circulation cleaning use product at 100ml to 100 litres water.
2. Draw solution through equipment and run to waste.

Main Wash

1. After milking, rinse milking equipment with cold water using at least 10 litres per unit.
2. Make up a 0.4% solution at the rate of 400ml to 100 litres water.
3. Circulate solution for between 7 and 10 minutes.
4. Run to waste.
5. Rinse with clean cold water using at least 10 litres per unit.

Highly concentrated blend of acids for unrivalled performance

High levels of surfactants to remove tough deposits

Effective in hard water areas using hot or cold water

Sizes available:

25L, 200L, 1000L

Application Advice:

1. After milking rinse milking equipment with cold water using at least 10 litres per unit.
2. Make a 0.5% solution at the rate of 500ml to 100 litres water at 80°C, using at least 10 litres water per unit.
3. Circulate solution for between 7 and 10 minutes or until the water temperature drops to 54°C.
4. Run to waste.
5. Rinse with clean cold water using at least 10 litres per unit.